Submersible Water Pump

Submersible water pump for wastewater and sewage.

Sales and installation of submersible water pumps in Barcelona, Tarragona, Girona and Lleida. Emergency service available.

> From €90. More information

Recommended for pumping rainwater, dirty water, agricultural water, septic tanks, wastewater, sewage, industrial fluids, wastewater treatment plants, filtration systems, etc.

  • SUB, TURBO and MOPA are compact pumps, easy to handle and designed for pumping slightly contaminated water.
  • SUBCC 24V DC pump for fresh or seawater applications, recommended for marine use.
  • DRINOX for pumping and draining rainwater or slightly contaminated water, offering high head performance thanks to its hydraulic design.
  • INOX-PALM and IPX for evacuating wastewater containing suspended solids.
  • MINIPAF, PAF and PAF-20 for pumping dirty water, wastewater, sewage, septic tanks and wastewater treatment plants.
  • AT and LFC are suitable for use with different fluids depending on their hydraulic design.
  • TRITURANT130 and TRITURANT150 feature a grinding system and are recommended for pumping domestic, sanitary, industrial and agricultural waste.
  • SUPERSAND for sludge drainage and dewatering, open pits, formwork dewatering, and trench and canal excavations.
  • SRI recommended for pumping acids, seawater, wastewater from chemical processes, as well as all types of liquids containing suspended particles.

SUB3500 Submersible Water PumpSUB3500

Submersible water pump for dewatering and dirty water applications.

APPLICATIONS

  • SUB 3500 AUT: Submersible water pump for draining rainwater, gullies and tanks.
  • SUB 7500 AUT: Submersible water pump for pumping dirty water containing suspended particles or small solids.

MATERIALS

  • Outer casing: Polypropylene.
  • Impeller: Noryl.
  • Shaft and inner motor casing: Stainless steel.
  • High-quality mechanical seal.

FEATURES

  • Motor cooled by the pumped water itself.
  • Class B insulation. IPX8 protection rating.
  • Built-in thermal overload protection.
  • Maximum liquid temperature: 35°C.
  • Supplied with 10 m power cable, float switch, and hose outlet connector.
  • Maximum immersion depth: 5 m.

ACCESSORIES

  • HOSE KIT: 7-metre discharge hose. 25 mm external diameter. Hose coupling elbow with 1″ – 1¼” connection.

MOPA Submersible Water PumpMOPA

Submersible water pump for dewatering and dirty water applications.

APPLICATIONS

  • Pumps down to a minimum water level of 2 mm.
  • Recommended for flooded basements, lift shafts, garages, rainwater collection, and swimming pool drainage.

MATERIALES

  • Outer casing and suction strainer: Stainless steel.
  • Impeller: Noryl.
  • Top handle: Polypropylene.
  • High-quality mechanical seal.

FEATURES

  • Motor cooled by the pumped water itself.
  • IP68 protection rating and Class F insulation.
  • Built-in thermal overload protection.
  • Maximum liquid temperature: 35°C.
  • Supplied with a 10-metre power cable.
  • Includes a float switch with a clip for manual fixing when required.
  • Also supplied with a non-return valve and hose connector (25/30/35 mm).

Note: Minimum drainage level: 2 mm. Minimum starting level for proper operation: 5 cm.

SUBCC24V 24V DC Submersible Hydraulic Water PumpSUBCC24V

24V DC submersible water pump.

APPLICATIONS

  • For pumping fresh water or seawater.

MATERIALS

  • Outer casing: Plastic.
  • Impeller: Noryl.
  • Shaft and inner motor casing: Stainless steel.
  • High-quality mechanical seal.

FEATURES

  • Open impeller design.
  • IP68 protection rating. Class F insulation.
  • Maximum liquid temperature: 35°C.
  • Supplied with a 10-metre power cable and hose outlet connector.

TURBO – Recommended for Draining Rainwater, Gullies and TanksTURBO

For dewatering and dirty water applications.

APPLICATIONS

  • Turbo 55: Submersible electric pump recommended for draining rainwater, gullies and tanks.
  • Turbo 100 D: Submersible electric pump recommended for pumping dirty water containing suspended particles or small solids.

MATERIALS

  • Outer casing: Stainless steel.
  • Impeller and diffuser: Noryl.
  • Shaft and inner motor casing: Stainless steel.
  • High-quality mechanical seal.

FEATURES

  • Motor cooled by the pumped water itself.
  • IPX8 protection rating. Class B insulation.
  • Built-in thermal overload protection.
  • Maximum liquid temperature: 35°C.
  • Supplied with a 10-metre power cable, float switch, and hose outlet connector.
  • Maximum immersion depth: 5 m.

DRINOX – Submersible Water Pump for Rainwater, Dirty or Filtered Water Drainage in Garages, Swimming Pools and BasementsDRINOX

Water drainage pumps.

APPLICATIONS

  • Submersible electric pumps recommended for draining rainwater, dirty or filtered water in garages, swimming pools, basements, and similar applications.
  • High discharge head performance thanks to the design of the impeller and pump body.

MATERIALS

  • Motor cover, motor casing, handle, fasteners, and impeller: AISI 304 stainless steel.
  • Shaft: AISI 316 stainless steel.
  • Pump body and strainer: Glass fibre-reinforced Noryl.
  • Graphite/alumina mechanical seal.

FEATURES

  • Motor cooled by non-contaminating dielectric oil.
  • IP68 protection rating.
  • Class F insulation.
  • Built-in thermal overload protection on all models.
  • Maximum liquid temperature: 40°C.
  • All models are supplied with a 5-metre power cable and float switch.

INOXPALM – Submersible Water Pump for Wastewater, Rainwater and Industrial Water with Suspended SolidsINOXPALM

Recommended for wastewater applications.

APPLICATIONS

  • Recommended for pumping wastewater, rainwater and industrial water containing suspended solids, thanks to its vortex-type impeller with a large solids passage.

MATERIALS

  • Motor casing, motor cover, handle and fasteners: AISI 304 stainless steel.
  • Pump body and base: G20 cast iron.
  • Impeller: AISI 304 stainless steel on all models, except the Inox-Palm 5, which features a G20 cast iron impeller.
  • Shaft: AISI 420 stainless steel.
  • Mechanical seal: Graphite/Alumina on all models, except the Inox-Palm 5, which features a double mechanical seal: one in Graphite/Alumina and the other in Silicon Carbide/Alumina.

FEATURES

  • Motor cooled by non-contaminating dielectric oil throughout the Inox-Palm range.
  • IP68 protection rating. Class F insulation.
  • Built-in thermal overload protection on all single-phase models.
  • Maximum liquid temperature: 40°C.
  • Inox-Palm 1 and 2 models are supplied with a 5-metre power cable. Inox-Palm 3, 4 and 5 models are supplied with a 10-metre power cable.
  • All single-phase models are supplied with a float switch.

Note: Upon request, single-phase models can be supplied with a vertical float switch.

IPX – Motor Cooled by Non-Contaminating Dielectric Oil Throughout the IPX RangeIPX

Water pumps for dewatering and dirty water applications.

APPLICATIONS

  • Manufactured entirely from stainless steel, recommended for pumping wastewater, rainwater and industrial water containing suspended solids, thanks to its vortex-type impeller with a large solids passage.

MATERIALS

  • Manufactured entirely from AISI 304 stainless steel, except for the shaft, which is made from AISI 316 stainless steel.
  • Graphite/Alumina mechanical seal.

FEATURES

  • Motor cooled by non-contaminating dielectric oil throughout the IPX range.
  • IP68 protection rating. Class F insulation.
  • Built-in thermal overload protection on all single-phase models.
  • Maximum liquid temperature: 40°C.
  • Single-phase models are supplied with a float switch.
  • IPX 1A and 2A models are supplied with a 5-metre power cable.
  • IPX 3 and 4 models are supplied with a 10-metre power cable.

MINIPAF – Pumps for Dirty Water, Wastewater, Sewage, Septic Tanks and Wastewater Treatment PlantsMINIPAF – Pumps for Dirty Water, Wastewater, Sewage, Septic Tanks and Wastewater Treatment PlantsMINIPAF ELECTRIC PUMPS

Wastewater pumps.

APPLICATIONS

  • Recommended for pumping dirty water, wastewater, sewage, septic tanks and wastewater treatment plants.

MATERIALS

  • Shaft: AISI 420 stainless steel.
  • Fasteners: AISI 304 stainless steel.
  • Casing, motor cover, pump body and impeller: G25 grey cast iron.
  • Mechanical seal: Fixed alumina face with rotating silicon carbide face.

FEATURES

  • Oil-bath enclosed motor.
  • IP68 protection rating. Class F insulation.
  • Maximum liquid temperature: 60°C.
  • Permissible pumped liquid pH range: 6 to 11.
  • Maximum liquid density: 1,100 kg/m³.
  • Supplied with a 10-metre power cable, except for the 0.5 HP models, which are supplied with a 5-metre cable.
  • Models with an open impeller allow the passage of liquids containing suspended solids.
  • Models with an offset (vortex) impeller provide full solids passage, allowing the handling of large solids.
  • Single-phase models are supplied with a float switch.

PAF – Submersible Electric Pumps for Wastewater, Sewage, Septic Tanks and Wastewater Treatment PlantsPAF

Wastewater pumps.

APPLICATIONS

  • Recommended for pumping wastewater, sewage, septic tanks and wastewater treatment plants.

MATERIALS

  • Shaft: AISI 420 stainless steel.
  • Fasteners: Stainless steel.
  • Casing, motor cover, pump body and impeller: G20 grey cast iron.
  • Mechanical seal: Fixed alumina face with rotating silicon carbide face.

FEATURES

  • Oil-bath enclosed motor.
  • IP68 protection rating. Class F insulation.
  • Maximum liquid temperature: 60°C.
  • Permissible pumped liquid pH range: 6 to 11.
  • Maximum liquid density: 1,100 kg/m³.
  • Supplied with a 10-metre power cable.
  • Single-phase models are supplied with a float switch.

PAF20PAF20

Submersible wastewater pump.

APPLICATIONS

  • Recommended for pumping wastewater, sewage, septic tanks and wastewater treatment plants.

MATERIALS

  • Shaft: AISI 304 stainless steel.
  • Fasteners: A2 stainless steel.
  • Pump body, impeller and motor cover: G20 grey cast iron.
  • Double mechanical seal: Silicon Carbide (pump side) and Ceramic/Graphite (motor side).
  • Seals: NBR.

FEATURES

  • Oil-bath enclosed motor.
  • IP68 protection rating. Class F insulation.
  • Maximum liquid temperature: 40°C.
  • All models are supplied with a 10-metre power cable and a mating flange complete with gasket and bolts for installation.
  • Supplied with a support base for portable installation and, optionally, with an auto-coupling foot for fixed installations.

AT – Hydraulic Pump for Clean Water, Rainwater, Mixed Water, Wastewater with Solids, Fibrous and Sludge-Laden LiquidsAT

Recommended for wastewater applications.

APPLICATIONS

  • Robustly constructed pumps suitable for a wide range of liquids, including clean water, rainwater, mixed water, wastewater containing solids and fibres, sludge, and similar fluids.

MATERIALS

  • Shaft: AISI 420 stainless steel.
  • Fasteners: AISI 304 stainless steel.
  • Motor casing, pump body and impeller: GG25 grey cast iron.
  • Seals: NBR.
  • Double mechanical seal: Silicon Carbide (pump side) and Ceramic/Graphite (motor side).

FEATURES

  • Asynchronous 2-pole or 4-pole electric motors, oil-bath enclosed.
  • IP68 protection rating. Class F insulation.
  • Maximum fluid temperature: 40°C with the pump fully submerged.
  • Maximum immersion depth: 20 m.
  • Permissible pH range: pH 6 to pH 10.
  • Maximum noise level: 70 dB(A). Depending on the installation and operating conditions, this value may be exceeded.
  • Clockwise direction of rotation when viewed from above.
  • Maximum number of starts: 15 starts per hour, evenly spaced over time.
  • All models are supplied with a 10-metre power cable and a mating flange complete with gasket and bolts for installation.
  • Supplied with a support base for portable installation and, optionally, with an auto-coupling foot for fixed installations.
  • Equipped with two thermal sensors (T1/T2) in the motor windings to monitor the internal motor temperature, and one moisture sensor (S) that generates a signal if fluid penetrates the mechanical seal chamber. These sensors must be correctly connected to a suitable control panel, which is not supplied with the pump.
  • The hydraulic performance data shown are valid for fluids with a density of <1.1 kg/dm³.

INSTALLATION TYPES

  • Portable installation: Pump mounted on a support base for mobile emergency operations. The pump must operate fully or partially submerged within the operating ranges 1 and 2 specified in the technical data.
  • Fixed installation: Submerged fixed installations using a twin guide rail system allow the pump to automatically couple to the discharge connection and evacuate the fluid. Sealing is achieved by the pump’s own weight. The pump can be easily removed for maintenance without the need to enter the working area. Pumps can operate fully or partially submerged within operating ranges 1 and 2 as defined in the technical specifications.

LFC – Dirty Water and Wastewater with ImpuritiesLFC

Recommended for wastewater applications.

APPLICATIONS

  • Submersible electric pumps recommended for pumping dirty water and wastewater containing impurities.
  • Thanks to their robust construction and design, they are also ideal for use in the food industry (macerated products, fruit pulp, slaughterhouse waste, etc.), agriculture (manure, slurry, etc.), the paper and pulp industry (paper pulp suspensions, pulp slurry, process water, etc.), the chemical industry (wastewater containing chemicals, brine, alkaline water, etc.), and the construction industry (drainage, pit dewatering, etc.).

MATERIALS

  • Pump body: GG25 cast iron.
  • Shaft and fasteners: Stainless steel.
  • Series F and C impeller: GG25 cast iron.
  • Series L impeller: GSnBz10 bronze cast.
  • High-quality mechanical seal or packed gland seal.

FEATURES

  • Asynchronous motor with dielectric oil bath (submersible pump version only). Class F insulation.
  • Totally enclosed externally ventilated motor (IEC standard) for surface-mounted and semi-submersible pump versions only.
  • Rated motor speed: 1,450 rpm or 2,850 rpm.
  • Maximum water temperature: 40°C.
  • Clockwise direction of rotation, viewed from the motor towards the pump.

OPEN IMPELLER – L SERIES

  • For dirty liquids and liquids containing suspended solids.
  • The pumped liquid must not contain long fibres or other materials that could cause ropeing or entanglement.

VORTEX IMPELLER – F SERIES

  • For dirty liquids containing large amounts of gas or air, suspended solids, and mixtures prone to ropeing or entanglement.
  • Free passage for solids equivalent to the discharge and suction port diameter.

SINGLE-CHANNEL IMPELLER – C SERIES

  • Designed for pumping non-abrasive wastewater containing suspended solids. Suitable for the same applications as the other impeller types, while offering superior hydraulic efficiency. The free solids passage ranges from 50 to 100 mm, depending on the impeller type.

TRITURANT130 – Submersible Electric Pumps with Grinding System for Domestic WastewaterTRITURANT130 Submersible Water Pump

Submersible electric pumps for wastewater.

APPLICATIONS

  • Equipped with a grinding system, making them ideal for pumping domestic wastewater.

MATERIALS

  • Shaft: AISI 420 stainless steel.
  • Motor casing and fasteners: AISI 304 stainless steel.
  • Pump body, motor cover and impeller: G25 cast iron.
  • Grinder: Hardened AISI 440 stainless steel.
  • Mechanical seal: Silicon carbide / silicon carbide.

FEATURES

  • Submersible Pump.
  • Oil-bath enclosed motor.
  • Single-phase version with thermal protection, capacitor, circuit breaker and ON/OFF switch.
  • Three-phase version available in a single 400 V voltage.
  • IP68 protection rating. Class F insulation.
  • Maximum water temperature: 40°C.
  • Supplied with a 10-metre power cable.
  • Single-phase models are supplied with a float switch.

Pumping Small Volumes of Water to Great HeightsTRITURANT150

Submersible electric pumps for wastewater.

APPLICATIONS

  • Recommended for pumping small quantities of water to high delivery heads. Thanks to their grinding system, they are ideal for the evacuation of wastewater in the civil, industrial, sanitary and agricultural sectors.

MATERIALS

  • Shaft: AISI 420 stainless steel.
  • Fasteners: AISI 304 stainless steel.
  • Casing, motor cover, pump body and impeller in G-25 grey cast iron.
  • Grinder in AISI 416 stainless steel.
  • Mechanical seal on the pump body in silicon carbide.
  • Mechanical seal on the oil chamber in ceramic-graphite.

FEATURES

  • Submersible pumps.
  • Oil-bath enclosed motor.
  • IP68 protection rating. Class F insulation.
  • Maximum water temperature: 40°C.
  • Maximum immersion depth: 20 m.
  • Permissible pumped liquid pH range: 6 to 11.
  • Supplied with 10 m of power cable.
  • Maximum liquid density: 1.1 kg/dm³.
  • Single-phase models supplied with an integrated control panel (without float switch).

GRINDER FEATURES

  • Consists of one fixed and one rotating component with 21 cutting points. Both components are manufactured from hardened stainless steel.
  • Thanks to the grinder’s special design, combined with the motor speed, it achieves up to 60,000 grinding operations per minute.

Submersible water pump for drainage and dewatering of muddy water in mines, open pits, formwork dewatering, and trench and canal excavations.SUPERSAND SUBMERSIBLE WATER PUMPS

Submersible electric pumps for dewatering and drainage.

APPLICATIONS

  • Submersible electric pumps specially designed for the drainage and dewatering of muddy water in mines, open pits, formwork dewatering, and trench and canal excavations.

MATERIALS

  • Pump body and motor jacket in AISI 304 stainless steel.
  • Open multichannel impeller in hardened high-chrome cast iron with excellent abrasion resistance. Hardness: 60 Rockwell.
  • Suction casing and strainer in hardened cast iron.
  • Shaft in AISI 403 stainless steel.
  • Double mechanical seal in silicon carbide.
  • 10 m H07RN-F neoprene power cable.

FEATURES

  • Submersible Pump.
  • Motor cooled by the pumped water flowing around the motor.
  • Internal motor protection against both overheating and overcurrent.
  • IP68 protection rating. Class F insulation.
  • Maximum immersion depth: 10 m.
  • Maximum liquid temperature: 40 °C.
  • Maximum liquid density: 1,100 kg/m³.
  • pH range: 6 to 13.
  • SUPERSAND AG models are fitted as standard with an agitator for more efficient pumping of muddy water.

Industrial water treatment, pumping of acidic water, seawater, etc.SRI

Submersible electric pumps for wastewater.

APPLICATIONS

  • SRI submersible pumps are ideal for industrial water treatment, pumping acidic water, seawater, acidic effluent from battery service stations, wastewater from chemical processes, and, in general, all types of liquids containing suspended solids.
  • They are particularly suitable for the tanning industry and for chemical, pharmaceutical and laboratory processes, as well as for hospitals.

MATERIALS

  • Pumps manufactured entirely from AISI 316 stainless steel.
  • Double silicon carbide mechanical seal with Viton seals, lubricated in a dielectric oil chamber.

FEATURES

  • Submersible pumps.
  • Dry motor (oil-free). IP68 protection.
  • Class F insulation.
  • Motor speed: 2,850 rpm.
  • All single-phase models are supplied with an integral float switch and 5 m of Santoprene cable with a cable gland for enhanced protection against highly aggressive liquids.
  • Maximum liquid temperature: 40 °C.
  • Maximum liquid density: 1,100 kg/m³.
  • Maximum viscosity: 100 cPs.
  • pH from 3 to 13

People also search for: submersible well pumps, maximum-flow centrifugal pumps, buy a pump for water extraction, configure a sump pump, pressure group analysis, submersible pumps for wells, browsing habits.

More information about the water pump or hydraulic pump on Wikipedia.